Robroad.net

第一次建设，以加强生产，流通，使用和安装管理，人身和财产安全，规范建筑安全玻璃应用，提高工程质量安全和保障，根据“中华人民共和国中国中华人民共和国建筑法”，“人们对中国中华人民共和国产品质量法“制定”建筑安全条例“(以下简称”规定“)的。

条所称安全玻璃二的规定是符合现行国家标准的钢化玻璃夹层玻璃，钢化玻璃线和夹层玻璃或由一个处理相结合的其他玻璃制品，如安全，如中空玻璃。

单片半钢化玻璃(热增强玻璃)，单片夹丝玻璃不属于安全玻璃。第三条

的安全玻璃生产，进口，销售和建筑施工，设计，安装，施工，监理单位，所有从事建筑，应是本规定的执行情况。

到市级以上(含市级)城市自“的要求，从实施，扩建，改建，装修及维修工程，如结构日期”，应这些规定要求使用安装安全玻璃。第四条

国家质检部门和工商行政管理等部门，建筑安全玻璃生产和产品质量的监督管理，在进口检验检疫监督管理工作安全玻璃流通领域的国家机构负责，建设行政责任为当地建筑物的使用，施工管理和监督工作安全玻璃安装。中国建筑玻璃与工业玻璃协会应通过引导企业遵守有关行的规则，自律，督促企业向有关政府部门协助执行这项规定。第五条安全玻璃

生产企业必须符合国家标准组织生产，所有的安全玻璃产品能生产以满足国家标准规定的要求。

关于由安全玻璃的技术规范，根据实施强制性检验进口同类产品，没有进口。

建设，采购和建筑施工单位必须有一个强制性的安全认证标志，并提供一个安全的产品质量认证的玻璃进口产品向提供检验检疫证明证书副本。以上资料存档的工程和技术资料，产品资料不足，不得使用。第六条

作为以下职位要求必须使用安全玻璃：建筑材料玻璃建筑
(- )7层和7层以上建筑物的窗口;
(b)在1.5平方米窗口的玻璃或底部的大面积玻璃从最后的装修小于500毫米的窗户脸
(三)墙(除玻璃外的所有屏幕上);
(四)倾斜装配窗，天花板不同类型(天窗，光，顶部)，天花板;
(e)及周边保留观光电梯;
(六)内部切断，浴室和屏幕外壳;
(七)楼梯，阳台，平台，走廊列议会和法院阻止板;
(八)为熊步行小组;
(九)水族馆观察窗和一个游泳池，观察孔;
(10)的入口和出口的公共建筑，并在大厅的其他部分;
(11)易的影响，冲击造成的损害身体的其他部分。

是本段的第11是指“建筑玻璃应用技术规程”JGJ113和“玻璃幕墙工程技术规范”JGJ102所称的网站。第七条

安全玻璃生产企业应能够产生一个独立的机构，应该有一个完整的加工设备，改善了生产，质量管理体系和严格的规章制度，要建立和完善质量检测体系，必要的测试设备和质量管理机构。

安全玻璃生产企业应取得指定的国家强制性产品认证机构颁发的强制性产品认证证书，没有强制获得认证的施工企业应当安全玻璃厂，销售和其他商业活动中使用。第8

建筑安全玻璃应使用根据该网站的规定，建设单位不得要求设计，在设计程序设计非安全玻璃单位，施工单位不得要求安装的非安全玻璃。第九条

设计，工程建设单位应当与该建筑物的设计强制性标准应根据使用该网站的规定安全玻璃应在设计文件标记的规定。第十条

建筑安全玻璃的单位进入施工现场应核实条产品质量的材料，安装施工过程所需的证据规定第五，要严格执行设计和安装技术标准。施工人员的培训工作，应该包括的内容安装安全玻璃。

监理单位应监督与批准的建设计划，严格按照设计施工单位。

第十一条本第六条，款的规定(三)，(四)和(e以上后安全玻璃安装完成地盘)由建设单位，组织设计，施工，监理及其他有关单位开展了无中间验收或验收不合格的，不得进行下一道工序的施工期间进行验收。第十二条

处罚

(1)安全：由于玻璃本身质量问题造成重大经济损失或人身伤害和死亡，安全玻璃生产企业负相应的法律责任，质量监督部门要产品质量监督检验不符合他们的质量要求，应该是他们的处罚，强制认证机构的有关规定，应是其撤销证书的有关规定。
按照
与处罚的有关规定实施，认证机构应当与法律责任。

(二)对不合标准的安全玻璃销售单位违反规定，其销售的重大经济损失或人身伤害和死亡产生的产品，以及销售单位应相应的法律责任。

(三)在进口贸易关系违反规定不安全玻璃，其进口造成重大损失或人身伤害和死亡，并承担相应的法律责任。

(四)在建筑，设计，施工，监理单位违反规定，由建设行政主管部门在依照有关规定，给予相应的处罚。在对不合标准的安全玻璃销售量违反规定，由工商行政管理部门进行调查，并依法处理。

由国家发展和改革委员会及相关部门负责解释的第13条的规定。

自2004年1月1日在第十四条本规定生效。 06.7.13

Management regulations: In order to strengthen construction safety production

The first building to enhance the safety of the production, circulation, use and installation management, the protection of personal and property security, regulate the construction of safety glass applications, improve construction quality, according to “People’s Republic of China Construction Law”, “People’s Republic of China Product Quality Law “develop” construction safety regulations “(hereinafter referred to as” provisions “).

the provisions of Article II of the alleged safety glass is in line with existing national standards for tempered glass, laminated glass and toughened glass or laminated glass by a combination of processing by the other glass products, such as security, such as insulating glass.

monolithic semi-tempered glass (thermally enhanced glass), single-chip wire glass folder does not belong to safety glass. Article III

all engaged in the construction of safety glass production, import, sale and building construction, design, installation, construction, supervision units, should be the implementation of this requirement.

to city level and above (including municipal)City since the “requirement” from the date of implementation, expansion, alteration, renovation and maintenance works, such as structures, should these provisions require the use of safety glass installed. Article IV

National quality inspection departments and industrial and commercial administration departments responsible for construction safety glass production and circulation areas of product quality supervision and management, national agencies in charge of import inspection and quarantine inspection supervision and management of safety glass, construction administration responsible for the use of local buildings, the installation of construction management and supervision of work safety glass. China Building Glass and Industrial Glass Association should be adopted to guide enterprises to comply with rules about line, exercise self-discipline, and urge enterprises to relevant government departments to assist the implementation of this provision. Article V of safety glass

production enterprises must organize production in accordance with national standards, all safety glass products to be manufactured to meet the requirements of national standards.

on imports of similar products made of safety glass in accordance with the technical specifications to implement mandatory tests, failed to import.

construction, procurement and construction units for the building must have a mandatory safety certification marks and to provide a copy of the certificate of product quality certification of safety glass made of imported products to provide proof of inspection and quarantine. The above information is archived as engineering and technical information, insufficient information of the Product shall not be used. Article VI

building with glass as construction materials required for the following positions must use safety glass:
(-)7-storey and 7 storey buildings above the window;
(b)large area in 1.5m2 bottom of the window glass or glass from the final fitting-out is less than 500mm of the windows face;
(c)walls (all except glass screen);
(d)tilt window assembly, various types of ceiling (with sunroof , light, top), ceiling;
(e)and its peripheral retaining sightseeing elevator;
(f)interior cut off, bathroom and screen enclosure;
(g)stairs, balconies, platforms, corridors column boards and in court to stop plate;
(eight)for the bear walking to the panel;
(9)Aquarium of the observation window and a swimming pool, observation hole;
(ten)of the entrances and exits of public buildings , and other parts of the hall;
(11)vulnerable to impact, impact damage caused by other parts of the body.

is the eleventh of this paragraph refers to “the application of architectural glass technology point of order” JGJ113 and the “glass curtain wall engineering technical specifications” JGJ102 alleged site. Article VII

safety glass manufacturing enterprises should be able to produce an independent body, there should be a complete process equipment, has improved production, quality management system and strict rules and regulations; should establish and perfect quality testing system, the necessary test equipment and quality management agencies.

safety glass production enterprise shall obtain a designated National Compulsory Product Certification agencies issued a mandatory product certification certificate is not mandatory to obtain certification of construction enterprises shall be safety glass factory, sales and other business activities use. Article eight

building safety glass should be used in accordance with the regulations of the site, the construction unit shall not be required to design units in the design program to design non-safety glass, and construction units shall not require the installation of non-safety glass. Article IX

design project construction unit shall, in accordance with mandatory standards for the design of the building should use safety glass in accordance with the regulations of the site should be marked in the design document. Article X

construction unit of the safety glass to enter the construction site should verify the provisions of Article V of the required proof of product quality materials, installation and construction process, should strictly implement the design and installation of technical standards. Construction work on staff training, should include the installation of safety glass content.

Supervision unit should supervise the construction unit in strict accordance with the approved construction design plan.

the provisions of Article XI of this Article VI, paragraph (c), (d)and (e)above the construction site after the completion of the installation of safety glass, by the construction unit organizational design, construction, supervision and other relevant units carried out between acceptance without middle unqualified acceptance or acceptance shall not be carried out next process of construction. Article XII

Punishment

(1)safety glass itself due to quality problems result in major economic loss or personal injury and death, and safety glass production enterprises corresponding negative liability, quality supervision departments should Products quality supervision and inspection do not meet their quality requirements, should be the relevant provisions of their punishment, mandatory certification bodies should be the relevant provisions of the revocation of their certificates.

in accordance with the relevant provisions of the penalty imposed, certification bodies should be related to legal liability.

(b)in violation of the provisions of the unit sales of substandard safety glass, its sales of products resulting in major economic loss or personal injury and death, and sales of units should be the corresponding legal responsibility.

(c)in violation of the provisions of the import trade relations fail safety glass, its imports causing substantial losses or personal injury and death, and bear the corresponding legal responsibility.

(d)in violation of the provisions of the construction, design, construction, supervision units, by the construction administrative departments in accordance with the relevant regulations, to give the corresponding punishment. In violation of the provisions of the unit sales of substandard safety glass, from industrial and commercial administrative departments to be investigated and dealt with according to law.

the provisions of Article XIII by the National Development and Reform Commission and relevant departments responsible for the interpretation.

the provisions of Article XIV of this since January 1, 2004 come into operation. (06-7-13)

Tags: article, construction, glass, safety